Skip to content

Enviro-Rock is made by Enviro-Corp Recycling, a division of United Concrete & Gravel Ltd.

Enviro-Rock, lightweight foam glass aggregate
Menu
Aerial view of the Enviro-Rock plant in Quesnel, BC

Listings and testing

Listed, independently tested and made in BC

Enviro-Rock is an accepted lightweight fill on the BC Ministry of Transportation and Transit Recognized Products List.⁠[1] It is made in Quesnel⁠[2] by a BC company that has been in construction materials since 1977.⁠[3]⁠[4]

Government listings

Where it is listed

BC Recognized Products List: accepted

Enviro-Rock is listed as an accepted product under Lightweight Fill Material (product 1414), which means it may be used on Ministry projects as long as it meets the requirements of the Standard Specifications and/or the Work.⁠[1] The Ministry notes that a listing is not an endorsement or a guarantee of performance on a specific contract.⁠[1] It was already listed in the April 2025 edition.⁠[5]

Alberta: potential product

Alberta Transportation and Economic Corridors lists Enviro-Rock as a potential product for proprietary lightweight fill.⁠[6] Its evaluation notes that the ministry has no experience with the product yet and that final acceptance as a proven product will be based on field performance.⁠[7]

Elsewhere: project acceptance

Enviro-Rock is not on a product list in Washington, Oregon or California. On those projects, acceptance rests with the owner and the engineer of record, using the test reports below.

Independent testing

Tested by an independent lab

Over the past two years, engineers at Metro Testing + Engineering, a CCIL-certified materials laboratory, carried out laboratory and field testing of Enviro-Rock and presented the results at the 2026 Vancouver Geotechnical Society Symposium.⁠[8]⁠[9]

Their paper covers quality control testing on three Lower Mainland projects: a soccer field on peat in Vancouver, a thermally insulating structural fill at BCIT, and a road elevation design.⁠[8] The shear box and density tests used crushed material, because the test equipment limits particle size to 25 or 30 mm; the authors plan further testing on uncrushed material.⁠[8]

The paper concludes that foam glass aggregate is "a suitable material for use as lightweight fill with good strength, and is generally cost effective." It also cautions that it "does not have good wear resistance and can be over compacted resulting in a higher density", and its results table reports a Micro-Deval abrasion loss of 32.2%.⁠[8] Enviro-Rock's installation guide calls for light compaction to 10 to 20%, with no vibration on rollers.⁠[10]

Selected results from the paper

Confined compressive strength at 20% deformationEN 1097-11 (modified)
918 kPa
Angle of internal friction, 25 to 65 kPa normal stress, crushed materialASTM D3080 (modified), 300 mm shear box, 30 mm maximum size
39°

Enviro-Rock test program

  • Bulk density (ASTM C29)
  • Water absorption (ASTM C127)
  • Sieve analysis (ASTM C136)
  • Compaction (ASTM D1557)
  • California bearing ratio (ASTM D1883)
  • Thermal resistivity (ASTM D5334)
  • Freeze and thaw (CSA A23.2-24A)
  • Compressibility (EN 1097-11, modified)

Reports for each test are available on request.⁠[11]

On real projects

Engineers and designers on Enviro-Rock projects

Ecora Consultants

Geotechnical engineer on a six-storey building on compressible clay in Kelowna, with Enviro-Rock named as the basis of design. The design was independently peer reviewed before tender.⁠[12]

Van der Zalm + Associates

Specified Enviro-Rock for the Jim Lorimer Park playground in Burnaby.⁠[13] Designed the Killarney Park soccer field in Vancouver, where Enviro-Rock was accepted as the approved equal to the originally specified pumice.⁠[14]

Metro Testing + Engineering

Quality control testing on three Lower Mainland projects, published in the 2026 Vancouver Geotechnical Society Symposium proceedings.⁠[8]

“It's an excellent product for having strength, long-term durability and lightweight. 100% I would recommend Enviro-Rock to anybody that wanted to try it.”
Mark Routledge, Matcon Underground Utilities ⁠[11]

Manufacturer

The company that makes it

Enviro-Rock is manufactured by Enviro-Corp Recycling, a division of United Concrete & Gravel Ltd.⁠[15] The business began as Ever-Redi Concrete Products Ltd. in Quesnel⁠[3], registered in 1977, and United Concrete & Gravel Ltd. is an active BC company today.⁠[4]⁠[16]

The parent company employs more than 75 people and has facilities in Quesnel, Williams Lake and 100 Mile House⁠[3], and its Quesnel plant is listed as a Concrete BC certified plant.⁠[17]

Its glass business has processed BC's recycled bottles for more than fifteen years: Encorp Pacific's 2010 annual report names United Concrete as Encorp's contracted glass processor.⁠[18] Enviro-Rock is made from that recycled glass, and the foaming oven is in Quesnel.⁠[2]

From the same glass, Enviro-Corp also makes Enviro-Grit blasting abrasive, Enviro-Cullet furnace-ready glass and Vitro Clear water filtration media.⁠[19]

An Enviro-Rock trailer marked 100% recycled glass product by United Concrete & Gravel Ltd

From waste to rock

See how it is made

Enviro-Corp's own video goes inside the Quesnel plant, past the foaming oven, and out to job sites where Enviro-Rock is placed.

Origin story: understanding foam glass gravel from waste to rock

Support

Support you can call on

Samples

A sample of Enviro-Rock is available on request, so you can handle the material before you specify it.⁠[22]

Training sessions

Enviro-Corp offers training sessions on how Enviro-Rock can work for your projects.⁠[23]

Test reports

Test reports for density, absorption, gradation, compaction, CBR, thermal resistivity and compressibility are sent on request for your submittal.⁠[11]

Installation guidance

An installation guide and a compaction equipment sheet cover lift thickness, compaction and separation geotextiles.⁠[10]⁠[24]

Delivery

Bulk delivery across BC, Alberta, Washington, Oregon and California⁠[25], in trailer loads of up to 140 m³ or 1.7 m³ super sacks.⁠[26]

Plant tours

Facility tours can be arranged for groups who want to see the recycling and manufacturing process. Call +1 604 557-9901 for details.⁠[25]

Questions

Before you specify it

Is Enviro-Rock approved for highway work?

In BC it is listed as an accepted product under Lightweight Fill Material on the Ministry of Transportation and Transit Recognized Products List.⁠[1] Alberta lists it as a potential product.⁠[6] Elsewhere, acceptance rests with the project owner and the engineer of record.

Has it been tested by anyone other than the manufacturer?

Yes. Engineers at Metro Testing + Engineering, a CCIL-certified lab, tested it in the lab and in the field and presented the results at the 2026 Vancouver Geotechnical Society Symposium.⁠[8]⁠[9]

Which company is behind Enviro-Rock?

Enviro-Rock is manufactured by Enviro-Corp Recycling, a division of United Concrete & Gravel Ltd., the company named on the BC Recognized Products List.⁠[15]⁠[1]

Can I see the material before I specify it?

Yes. Request a sample with the quote form.⁠[22]

How long has the company been around?

Its founding company was started in Quesnel and registered in BC in 1977.⁠[3]⁠[4] Its glass recycling business was Encorp Pacific's contracted glass processor by 2010.⁠[18]

Sources

  1. [1] Recognized Products List, Lightweight Fill Material (October 1, 2026), BC Ministry of Transportation and Transit
  2. [2] Abbotsford's Enviro-Corp Recycling transforming glass into rocks, Langley Advance Times
  3. [3] About us, United Concrete & Gravel Ltd.
  4. [4] Ever-Redi Concrete Products Ltd., BC0161296, registered 1977-05-09, OrgBook BC (BC Registries)
  5. [5] Recognized Products List, April 2025 edition (archived), BC Ministry of Transportation and Transit, via the Internet Archive
  6. [6] Products List: Lightweight Fill (March 18, 2026), Alberta Transportation and Economic Corridors
  7. [7] Product evaluation: Enviro-Rock (8165-5-7), Alberta Transportation and Economic Corridors
  8. [8] Foamed glass aggregate as lightweight fill (R. Fenton and J. Thai, Metro Testing + Engineering), Vancouver Geotechnical Society Symposium Proceedings, June 5, 2026
  9. [9] Certifications, Metro Testing + Engineering
  10. [10] Enviro-Rock installation guide, Enviro-Corp Recycling
  11. [11] Enviro-Rock technical data, Enviro-Corp Recycling
  12. [12] Case study: 6-storey building, Kelowna, Enviro-Corp Recycling
  13. [13] Case study: Jim Lorimer Park playground, Burnaby, Enviro-Corp Recycling
  14. [14] Case study: Killarney Park soccer field, Vancouver, Enviro-Corp Recycling
  15. [15] Enviro-Rock civil infrastructure brochure (metric), specification table, Enviro-Corp Recycling
  16. [16] United Concrete & Gravel Ltd., BC0665004, active, OrgBook BC (BC Registries)
  17. [17] Certified plants, Concrete BC
  18. [18] Encorp Pacific 2010 annual report, Encorp Pacific (Canada), via the Government of BC
  19. [19] Enviro-Corp Recycling home page, Enviro-Corp Recycling
  20. [20] 32nd VGS Symposium: Advances in Soil Mechanics, exhibitors, Vancouver Geotechnical Society
  21. [21] How an Abbotsford glass recycling facility is changing the game, CBC News
  22. [22] Enviro-Rock samples, Enviro-Corp Recycling
  23. [23] Enviro-Rock cellular foam glass aggregate, Enviro-Corp Recycling
  24. [24] Enviro-Rock compaction equipment sheet, Enviro-Corp Recycling
  25. [25] Frequently asked questions, Enviro-Corp Recycling
  26. [26] Enviro-Rock delivery trailer overview, Enviro-Corp Recycling

Talk to the team behind Enviro-Rock.

Ask for test reports, a sample or a price for your project, and a person replies. For product and availability questions, call the AI information line any time, and ask to speak with sales directly.